Inlet Screens

About this Accessory

Tankworks water tanks are supplied with an inlet screen and a light guard.

The standard size screen is 400mm diameter, and it can be positioned to suit your installation.

The light guard is fitted under the inlet screen, and prevents sunlight from hitting the rainwater. This reduces the chance of algea growth in your water tank.

Tank inlet screens keep leaves, animals and insects from getting into your water tank. It's important to keep the inlet screen clean and free of debris, as this will help to keep your tank clean, and minimise wasted lost water during heavy rainfall.

 

Benefits

  • 400mm standard size
  • Larger diameter screens available
  • Can be located anywhere on the lid of the tank
  • Stainless steel Queensland spec 1mm appeture mesh
  • Light guard reduces the chance of algae growth

Selecting the right Tank

One

Choose the largest tank that will fit into your available area.

Direct as much of your roof area as practical into your tank.

 
Two

Normal garden hosing can use up to 1000 litres per hour of water.

A 5000 litre water tank will therefore provide around 5 hours of watering time. Make sure capacity of your tank will suit your water use requirements.

 
Three

One square metre of roof area will provide one litre of water for every millimetre of rain.

Maximising the roof area feeding to your tank is the best way to ensure you collect as much water as possible.

 
Four

Be aware that every 1000 litres of water in your tank is one tonne of mass.

Considering the location of your tank, and be sure not to place the tank in an area with unstable ground or too close to existing house footings. Refer to our data sheet.

 
Five

Remember that you will need to access the leaf strainer to clean out leaves.

This may be a consideration when deciding the height and location of your tank.

Subscribe to our newsletter for great water-wise tips, news and reviews

Thank you for subscribing.